Clothing

Keep your fingers nimble when the temperature drops in the Liner Gloves. Touch screen-friendly thumb and forefinger mean you can stay in touch without freezing your fingers. - Versatile, lightweight knit for ease of movement - Rib knit cuff finishing for bulk-free fit - Knit-in touch screen capability on thumb and index finger - Knit in Taiwan: Body: 45% Merino Wool, 45% Acrylic, 9% Nylon, 1% Elastane; Thumb & Index Finger Tip: 95% Polyester, 4% other fiber, 1% Elastane

SOMEONE HAS TO BE THE GUINEA PIG Bold and steadfast, Sidekick is the Robin to your Batman, the Calvin to your Hobbs, the Peanut Butter to your Jelly! It's always there for you. Suit up in the Sidekick and save the day as a trail-building, gap-sending vigilante. Cape sold separately. Features: - 98% polyamide-nylon/2% elastane - Rib-knit cuff for improved fit - Mesh articulation zones for increased breathability - Arch band for improved support and fit - Seamless heel and toe for increased comfort

When frost-covered leaves litter the ground but the singletrack beckons, reach for the Canyon ECOLoft Jacket. This thoughtfully designed jacket will keep you warm without overheating when the intensity picks up. We use sustainable and highly-breathable ECOLoft ActiVe insulation to quickly transfer excess heat, providing consistent warmth, so you can keep riding instead of adjusting layers. A two-way zipper makes it easy to quickly dump heat from a climb even if you're wearing a pack. And should things get damp, our PI Dry technology shrugs off mist and tire spray leaving you free to focus on the trail ahead. FEATURES - ECOLoft ActiVe SR insulation regulates temperature, made with recycled content - Tuned air-permeability balances warmth and breathability - Two zippered hand pockets and one zippered chest pocket - Tall, 4-inch collar blocks the cold - Hood designed for under-the-helmet heat retention - Two-way zipper for venting and access to rear cargo pockets - PI Dry technology for permanent water-shedding performance - Standard fit FABRIC - 89% RECYCLED POLYESTER, 11% ELASTANE Made in Taiwan

Reach for the Canyon jersey when the day's agenda calls for singletrack shenanigans followed by tacos and a post-ride beverage. This top gives the look and fit of your favorite T-shirt with the function of a technical jersey. We built this stylish top from highly breathable drirelease fabric for all-day comfort and added a stash pocket for a card or ID. FEATURES - Constructed from 85% recycled polyester and 15% TENCEL with drirelease - Dropped rear hem for on-bike coverage - Hidden zippered pocket on the hip - Relaxed fit FABRIC - Main Body: 88% recycled polyester, 12% tencel lyocell Trim: 86% recycled polyester, 14% Made in El Salvador *Model is 5'8" 130 lbs, wearing a Medium

The Summit Jersey is a mountain bike top that won’t hold you back when you’re pushing the limits. This highly breathable top is constructed from fast-drying fabric made with 100% recycled content, and loaded with performance-focused features such as rolled forward shoulder seams that create an excellent on-bike fit and a drop tail that provides extra coverage from tire spray. And in case you’re looking for protection from more than the sun, there is enough room in the sleeves for low-profile elbow guards. FEATURES - Constructed from 100% recycled polyester fabric - Optimized for on-bike fit - Dropped rear hem for on-bike coverage - Elbow guard compatible - Standard fit FABRIC - 95% recycled polyester, 5% polyester Made in China *Model is 5'8" 130 lbs, wearing a Medium

Great for riding, mechanical work, or to just show off the colors of your favorite tool brand, the GLV-1 is the perfect combination of comfort and function. - Digital Amara palm with anatomically shaped external reinforcement patches - Touch phone compatible thumb and index fingertips - Comfortable, soft fleece brow wipe - Durable two-way stretch knit glove back with knuckle gussets - TPR adjustable closure tab

This reflective yellow leg band with adjustable hook and loop closure secures loose pant legs to prevent chain catching. - Reliable hook and loop closure system works both wet and dry - Reflective yellow material for additional visibility - 1.25-inch width

- Flexible mesh back - Adjustable TPR strap - Three-panel palm - DOT-embossed palm material for added grip - Gel-padded palm - Microfiber nose wipe

- Wind-resistant/water-resistant - Insulation for warmth - Reflective logo

- Wind-resistant fabric - Microfleece lining - Water-resistant - Reflective logo

Ultra Slim and Soft Impact Gel Protector Minimalistic, comfortable, ergonomic fit, and uncompromised CE-certified impact protection. The Airflex Knee Guard Pro is an engineering masterpiece! The lightweight construction and silicone grip panels made it possible to delete the thigh strap and still keep that famous Leatt non-slip fit. This knee guard meets all of our design criteria. By changing over to 3D-shaped impact gel, we achieved the minimalistic slim shape while still keeping the CE Impact protection. - Super slim and lightweight AirFlex impact gel protection - Side and upper knee impact protection - Pre-curved design for optimal fit and function - Silicone-printed, cupped knee grip - Premium comfort using MoistureCool and AirMesh wicking fabrics - All protection materials perforated for ventilation - Silicone-printed, non-slip cuffs - Total Leatt protection score of 15 points - CE tested and certified as impact protection: Knee EN1621-1 - Weight: from 300g (0.66lbs) pair

- Patented Halo Sweat Block Seal channels Sweat away from eyes and face - Dryline fabric absorbs Sweat - one size fits all - Made in the U.S.A.

Enjoy exceptional breathability, modern technology, and seamless comfort for the road ahead in the Xnetic Road Glove. The Xnetic Road Glove redefines the cutting edge of glove-making technology. By leveraging the advanced Xnetic knit construction techniques we pioneered in footwear, we've created a glove with a truly seamless one-piece backhand that contours with your hand like a second skin, for the ultimate in fit, breathability, and comfort. Upper Construction: - One-piece Xnetic knit backhand - Stitch-free slip-on cuff - Reflective finger pulls - Differential knit venting Padding: - Optimized gel padding Palm: - Super Fit Engineered three-panel design - Quick-drying microfiber palm

Enjoy exceptional breathability, modern technology, and seamless comfort for the road ahead in the Xnetic Road Glove. The Women's Xnetic Road glove redefines the cutting edge of glove-making technology. By leveraging the advanced Xnetic knit construction techniques we pioneered in footwear, we've created a glove with a truly seamless one-piece backhand that contours with your hand like a second skin, for the ultimate in fit, breathability, and comfort. Upper Construction: - One-piece Xnetic knit backhand - Stitch-free slip-on cuff - Reflective finger pulls - Differential knit venting Padding: - Optimized gel padding Palm: - Super Fit Engineered three-panel design - Quick-drying microfiber palm

Louis Garneau's Leg Warmers 2 are crafted from Garneau's HeatMaxx nylon/spandex material with soft brushed insides for optimal moisture transfer and heat retention. You'll also appreciate the comfy flatlock seams, silicone thigh grippers to keep them in place, UPF 50 sun protection, and reflective accents for enhanced visibility. And, when you warm up, these warmers are easily stashed in a pocket or pack.

It may feel too thin to be that efficient, but Garneau's Matrix 2.0 Arm Warmers are sure to provide you with all the protection and comfort you’re looking for. The multizone construction of the fabric offers breathability and protection where needed without the added seams, and the high-precision knitting results in a thin and stretchable product. A unique seam minimizes chafing for an optimal comfort.

It may feel too thin to be that efficient, but the Matrix 2.0 balaclava is sure to provide you with all the protection and comfort you’re looking for. The multizone construction of the fabric offers breathability and protection where needed without the added seams, and the high-precision knitting results in a thin and stretchable product. A unique seam minimizes chafing for an optimal comfort. Technical Details - Fabric: Matrix 2.0: Multizone seamless construction provides breathability and protection for optimal comfort - Feature: Unique seam: Minimizes chafing for enhanced comfort

- Body-mapped, impact-absorbing SmartFlex pads layered on top of a ventilated, soft inner foam layer allowing for maximum protection, comfort, and breathability - SmartFlex pads offer form-fitting and lightweight protection that is flexible as you ride and hardens on impact - Moisture-wicking, UPF 50+ fabric - Machine washable - Compression sleeves with grippers at the top and bottom to keep guards in place - CE 15613 impact with 1621 coverage

A pair of trail-specific MTB socks can make a huge impact on your level of comfort. The 6-inch Trail Socks will keep your feet cool, dry, and comfortable. They are more breathable than traditional socks and have flat stitching to help alleviate chafing. The socks also feature mesh zones throughout for added breathability. - Mesh zones throughout for added breathability - Flat stitch toe construction - 6-inch cuff length - 71% nylon / 14% polyester / 12% cotton / 3% spandex

A pair of trail-specific MTB socks can make a huge impact on your level of comfort. The 8-inch Trail Socks will keep your feet cool, dry, and comfortable. They are more breathable than traditional socks and have flat stitching to help alleviate chafing. The socks also feature mesh zones throughout for added breathability. - Mesh zones throughout for added breathability - Flat stitch toe construction - 8-inch cuff length - 68% nylon / 15% polyester / 14% cotton / 3% spandex

Mountain Bike Socks Offering Ventilation, Comfort, and Trail-Specific Cushioning Designed for your specific brand of rowdiness, the Ranger Sock gets that your feet were not meant to suffocate while you get your shred on. The mesh zones of these socks provide exceptional breathability and ventilation, while the toe construction offers even more comfort with no bulky stitching. When the trail gets really rough, the rib-knit upper ensures these socks won't fall down around your ankles. - Mesh zones provide added breathability - Compression arch support for superior fit and comfort - Rib knit upper won't slide down when the trail gets rough - Flat-stitch toe construction offers improved comfort MATERIALS - 72% Nylon / 12% Polyester / 12% Cotton / 4% Elastane

Concealed Coverage The Baseframe is a breathable base layer with built-in guards on the shoulder and elbow. It's designed as an unrestrictive base layer coverage that can be worn in conjunction with other guards in the Fox line. Features - Impact-absorbing foam provides full coverage and unrestricted range of motion - Body heat activates (softens) the foam to conform to the body - EN1621-1 Level 1 Elbow and Shoulder including high and low-temperature conditions - Moisture-wicking, breathable, form-fitting stretch main body fabric - Strategically placed open stretch mesh for maximum ventilation - Cordura fabric offers higher abrasion resistance in key impact areas - Foam inserts are removable for easy washing Certifications - EN1621-1 Level 1 Elbow and Shoulder including high and low-temperature conditions

The go-to mountain bike pants for race day It's race day—are you ready? The Defend Race Pants will give you one less thing to worry about as you're lining up to send it. These pants are ready to rumble, with 100% Cordura fabric giving them high resistance to all those bumps and scrapes you'll encounter as you hit warp speed, and double layer knee panels for even more peace of mind. The secure fit comes courtesy of the race ratchet system, which also adjusts quickly and easily on the fly. And while you may be on your all-time hottest lap, the TruDri and TruMotion fabrics will keep you cool and make sure you keep on moving freely with maximum mobility. More airflow levels up that flow with strategically placed venting, while the tapered lower leg adds a little more cooling while also reducing snag. Meet your new go-to pants for your next race run. - 100% Cordura fabric body provides higher resistance to abrasion - Double-layer knee panels for added durability - Proven race-ratchet closure provides secure fit and quick on-the-fly adjustments - Secure zip hand pockets hold essential items - Tapered lower leg with stretch mesh inset reduces snag and adds cooling - TruDri fabrics move sweat away from the body to keep you dry - TruMotion all-way stretch fabric offers full range of mobility - DWR finish sheds moisture, dirt, and debris - Body-mapped laser perforations on back panels increase airflow keeping you cool - Inseam: 32'' - Body: 89% Cordura, 11% spandex dobby

Dirtpaw Gloves - Youth

Ultralight, Pedal-Friendly MTB Knee Guards The Enduro D3O Knee Guard offers our highest level of protection in an ultra-light, pedal-friendly design. The slip-on design with CE-certified D3O impact-absorbing inserts provides you with minimal restrictions and maximum benefits. The moisture-wicking, open mesh design behind the knee improves airflow and helps to reduce overheating hot rides. Features - EN1621-1 Level 1 Knee including high and low-temperature conditions - CE certified D3O insert for world-leading impact protection - Moisture-wicking, open stretch mesh at back of knee for breathability - Cordura fabric offers higher abrasion resistance in key impact areas - Reinforced skid plate reduces friction with the ground in a sliding fall - Removable D3O Insert for easy washing Construction - 70% PU / 20% polyester / 10% nylon

Shuttling to the top of your descent isn't always an option, and besides, sometimes it's nice to earn it. The Enduro Elbow Sleeves are lightweight and breathable for maximum comfort. They allow full range of motion thanks to a high-stretch rear panel. - Slip-on design - Perforated neoprene on the outside of the arm & stretch material on the back - Multi-fabric design fits perfectly, keeps you cool & dry and prevents slipping

Shuttling to the top of your descent isn't always an option, and besides, sometimes it's nice to earn it. The Enduro Knee Sleeves are lightweight and breathable for maximum comfort. They allow full range of motion thanks to a high-stretch rear panel. - Pedal friendly slip-on design - Perforated neoprene on the outside of the arm & stretch material on the back - Multi-fabric design fits perfectly, keeps you cool & dry, and prevents slipping

The Flexair Lite shorts are incredibly lightweight and comfortable. Constructed using Fox's TruMotion 4-way stretch fabric, they rapidly wick perspiration and flex to give you a feeling of freedom unlike any mountain bike short you’ve ever worn. Strategically placed laser-cut perforations increase comfort further by providing exceptional breathability. - Ratchet closure provides a secure fit & quick on-the-fly adjustments - Secure zip hand pockets - Body-mapping laser perforated on front & back to keep you cool - TruDri fabrics move sweat away from the body to keep you dry - TruMotion all-way stretch fabric for increased mobility - Durable Water Resistant finish sheds moisture, dirt, & debris - Detachable liner with Comp chamois - Inseam: 13-inches (size large) - Body: 87% polyester / 13% spandex - Lining: 90% polyester / 10% spandex

Slip-On Knee Guards Designed with D3O The Launch D3O Knee Guard offers an excellent combination of impact-absorbing protection with a value-focused build. The CE-certified D3O insert works seamlessly with the slip-on design to provide all-day comfort and confidence. Features - CE certified D3O insert for world-leading impact protection-?EN1621-1 Level 1 CE Certification - Pre-curved ergonomic fit - Slip-on fit with hook-and-loop adjuster - Perforated neoprene offers comfort & breathability Construction - 20% nylon / 40% SBR / 30% PU / 5% polyester / 5% spandex

The Launch Pro D3O Knee Guards build on the legendary performance of Fox's existing guards and elevate the performance to new heights. Designed with input from Fox's elite level race team, these knee guards utilize D30 - the worldwide leader in impact reducing materials - and combines that technology with a removable hard cap for bulletproof durability and all mountain performance. The D3O CE certified build allows the knee guard to stay flexible for ease of movement and comfort, but upon impact, they instantly harden to dissipate the force of the crash. The Launch Pro D3O Knee Guards have a breathable, moisture wicking construction for all day comfort. - Enhanced breathability through perforated, non-toxic, hypoallergenic Ariaprene neoprene - Anatomically designed panels provide superior pedal efficiency and on-bike comfort - Moisture wicking back fabric keeps you cool and dry - Removable/replaceable hardshell front knee cap to reduce snagging - D3O CE certified insert for impact protection